"PAINTLINE CHEMICAL" MAS'ULIYATI CHEKLANGAN JAMIYAT

Dispersant, defoamer and additives that improve sliding and filling of paint and varnish materials produced by Evonik (Germany), BykChemie (Germany)

Technical dichloromethane (Methylene chloride). It is an organic compound, a transparent, highly mobile and volatile liquid with a characteristic odor of halogen derivatives. Packaging: 260 kg each. in a metal barrel.

It provides good flexibility and adhesion on non-polar surfaces and exhibits excellent wetting characteristics. Mainly as a reactive diluent for high viscosity epoxy resins, compatible with epoxy resin in all concentrations, as well as to enhance the hardener Widely used in high-quality epoxy floor coverings, food grade epoxy paints, epoxy casting materials, casting materials, adhesives, insulation materials and floor coverings Made in China

CORONATE MPAX-75 is a modified polyisocyanate based on An HDI containing isocynurate. It contains about 75% solid with xylene monomethyl ether acetate and propylene glycol. It is a hardener for two-component, non-yellowing polyurethane paints with excellent weather resistance. CORONATE MPAX-75 is widely used in the paint and varnish industry for various applications such as motorcycle parts, car repair, wood finishing, etc. This is due to its resistance to high temperatures, high solubility in solvents, and good compatibility with polyols. Made in Japan

CORONATE HXR and HX is a hardener for non—yellowing polycarbonate paints, which has excellent properties compared to the polyurethane or adduct-type hardeners CORONATE HXR and HX, widely used in the paint industry for various applications such as repainting motorcycle and automobile parts. This is due to its resistance to high temperatures, high salt in solvents, and impurities in water. The combination of CORONATE HXR and HX with acrylic polyols gives a non-yellowing paint with excellent resistance to weathering and UV rays, so that its original color can be preserved for a long time. This two-component type of paint is used for car repairs, industrial purposes, etc. The combination of CORONATE HXR and HX with alkyd polyols gives a two-component paint that is used for industrial purposes, for wood finishing, etc. The addition of CORONATE HXR and Hx to some nitrocellulose or polyurethane-based paints significantly improves their physical properties, such as chemical resistance to solvents. Made in Japan

Toluene diisocyanate (TDI) allows the production of rigid polyurethane foams resistant to high temperatures Toluene diisocyanate is used as an intermediate chemical in the production of polyurethane products such as foams, coatings, and elastomers. Industrial use • Adhesives and chemical sealants • Intermediate products • Solvents (which are part of the product or mixture) Consumer use • Adhesives and sealants • Paints and coatings Household and commercial/institutional goods • Home service • Personal hygiene General information about production Industry Manufacturing sectors • Glue production • Manufacture of furniture and related products • Production of paints and coatings • Production of plastic materials and resins • Production of transport equipment • Wholesale and retail trade Properties in nature: colorless transparent or light yellow flammable liquid. There is a strong irritating odor. The boiling point is 247 °C. The melting point is 19.5-21.5°C. The flash point is 127 °C. The relative density was 1,217. Made in Korea

Unate L75 is widely used in high-quality paints and coatings for wood and furniture. Made in Korea

Polyester resin injection molding. Eskim/ Turkey, Resitan / Iran, Turkuaz/ Turkey 230 kg in a barrel. It is used for glass-filled plastics and casting, in the automotive industry, shipbuilding, mechanical engineering and for creating architectural forms. all additives are also available; accelerator, hardener, gelcoat, glass wool and matting (of different densities) Warehouse in Andijan Terms of delivery; pickup and delivery from 5 barrels.

Domacryl 850 60 T is an air-dried polyacrylic resin developed primarily for the manufacture of road marking paint. It is used alone or in combination with acrylic resin or chlorinated paraffin. Domacrylic 850 60 T road marking paints have good durability and good resistance to yellowing. Made in Korea

Benzyl alcohol is a good solvent with an average Bolling temperature. It is mainly applied to silver curing modifier and epoxy resin solvent 1. Epoxy paint, epoxy flooring, sealing, epoxy glue and epoxy decorations. 2. Medical synthetic solvent, preservative for ointments or liquid medicines. 3. Photo developer, cleaning agent, synthetic glass solvent and lens dye. 4. Solvent for meat products, ink for stamps and oil for ballpoint pens. 5. Perfume fixative, an essential component of jasmine, tuberose or ylang, perfume composition soap and daily cosmetics. Made in China

Fasadga, ichkariga, sement va gipslik quruq qorishmalar uchun xar xil turdagisi mavjud 30-40-100-150-200-250 A. suvni ushlab turish HPMC suvni yaxshi ushlab turish ko'rsatkichlariga ega, namlikning taglik yuzasiga juda tez kirib borishini oldini oladi va suvni keng harorat oralig'ida ushlab turish qobiliyatiga ega. B. Qalinlashuv HPMC eritmaga mos yopishqoqlik berishi, tortishni yaxshilashi, ish faoliyatini yaxshilashi, cho'kishga qarshi turishi va qurilish samaradorligini oshirishi mumkin. C. Suspenziya Ba'zi hollarda HPMC eritmaning mustahkamligini o'zgartirmasdan eritmaning suspenziyasini ta'minlaydi, shunda eritma tizimi cho'kma hosil qilmasdan teng taqsimlanadi. ​D. Elim HPMC ning namlash qobiliyati nafaqat eritmaning yopishqoqligini yaxshilaydi, balki eritmaning sirt faolligi va yopishishini ham ta'minlaydi. telegram WhatsApp bor

PU Binder for the device of seamless coating of rubber chips, EPDM rubber chips, colored rubber chips. any payment method PU Binder is a one-component polyurethane composition with a viscous consistency from transparent to light honey color. It does not contain organic solvents. It cures with air moisture. When cured, it creates an elastic, durable joint. advantages low viscosity good compatibility with various fractionated fillers (rubber crumb, EPDM rubber crumb, TPV, painted SBR crumb) forming a monolithic (seamless), abrasion-resistant and impact-resistant coating; good water transmission due to high porosity, resulting in The coating always stays dry.; hygiene and high injury safety; high water resistance; high elasticity.

Components A - B are Polyol and Isocyanate for spraying and pouring foam. OOO "PAINTLINE CHEMICAL" company offers professional polyurethane foam spraying for insulation and waterproofing. We guarantee high-quality application, long-lasting results and lower heating costs. Polyurethane foam is ideal for all types of buildings, providing reliable protection from cold, moisture and noise. Fast installation and affordable prices! All components for spraying and pouring polyurethane foam are in stock. Buy PU foam components at the factory price from us. In stock: Packing of 470 kg - We will arrange delivery to your facility on the day of payment - We will consult on all issues - - Add this ad to your Favorites so you don't lose it. And take a look at our store to get acquainted with the entire range of goods and services.

A two-component PU foam system for the manufacture of rigid polyurethane foam insulation of storage-type water heaters by direct foaming. Production of monolithic polyurethane with high chemical properties and characteristics for the manufacture of heat-resistant rigid foam.

The system is a two-component sprayable polyurea elastomer for waterproofing and anti-corrosion protection of various substrates. It has excellent mechanical properties and chemical resistance compared to polyurethane and hybrid coatings. It is used for waterproofing: roofs, terraces, parking lots, concrete channels in sewage treatment plants, cladding and waterproofing of swimming pools; anti-corrosion protection of metal structures, bridges, pipelines, widely used in the oil and gas industry; it is also used for reliable mechanical protection of surfaces from abrasion and other influences, in floor coverings and in the automotive industry. The standard color is gray or colorless. It can be supplied to order in any RAL color. Country / manufacturer Turkey / Aktif Poliuretan

This model is designed for the manufacture of rigid polyurethane foam by pouring using high-pressure machines. It is recommended for the production of sandwich panels and household refrigerators by the periodic method.

A-33 is a classic catalyst for the reaction of isocyanates with polyols and water. The active ingredient in this catalyst is a tertiary amine - 1,4 diazobicycle ktane (triethylenediamine, TEDA). It can be used in many formulations of polyurethane elastomers, coatings and foamed materials (mainly elastic).

POP-45 is a type of polymer polyol product that is made from TR3050, styrene and propylene. It is widely used for the production of foam rubber. We control its residual content using special technology. This product can be used directly in the manufacture of high-rigidity foam products, and it can also be used in the production of foam that has high tensile strength, fire resistance, and yellowing resistance.

Tin octate T9 T-9 (divalent tin octate) is the main catalyst for the production of polyurethane foam., silicone rubber cured at room temperature, polyurethane rubber, polyurethane coating catalyst. The chemical properties are extremely unstable and easily oxidized.. The English name is Stannous octoate The chemical formula is C16H30O4Sn Molecular weight 405.1 CAS registration number 301-10-0 Density 1.251 The main tin content is 28+/-0.50%

Silicone oil L580 is a highly effective surfactant based on a silicon—carbon bond used for the production of flexible foam.. It is a highly effective surfactant that forms a foam with minimal foam collapse and high breathability.. It is suitable for the production of elastic polyester foam.. L580 can be widely used in various density production, especially brings good results in medium & high density foam composition. Product Application 1. Suitable for polyester type foam production on all types of foam production equipment. For example, optimize the foaming equipment and the box foaming process. 2. Excellent stability. 3. Wide air permeability profiles for different formulations. 4. Provides excellent results in the production of flexible foam of medium density. instagram: