HELI CPCD25 — 2.5 ton diesel loader HELI CPCD25 is a four—wheeled diesel forklift truck with a load capacity of 2500 kg. Different engines are used for this series, including Quanchai engines. The version with Quanchai QC490GP is designed for warehouse and loading and unloading operations. Main Features Manufacturer: HELI Model: CPCD25 Load capacity: 2500 kg Engine: Quanchai QC490GP Fuel: diesel Number of cylinders: 4 Lifting height: about 3 m as standard Transmission: An automatic version is available Fork length: about 1070mm Fuel tank: about 50 liters Maximum speed: up to 19 km/h, depending on the design. , Quanchai QC490GP engine The QC490GP is a Quanchai diesel engine used on HELI CPCD25/CPCD30 forklifts. Depending on the specific engine modification, the characteristics differ. For some versions of the CPCD25 with the QC490 family engine, an output of about 39 kW at 2650 rpm is indicated. How does the loader work? The diesel engine transfers power to the transmission and hydraulic system. The hydraulic pump creates oil pressure. The oil enters the hydraulic cylinders that lift the mast and forks. To lower the forks, the oil is returned through the valve to the hydraulic system, so the load is lowered in a controlled manner. , Fuel consumption The exact flow rate depends on the load and operating mode. For practical calculations, you can focus on about 2.5–4 liters/hour, but this is not a single factory standard for all operating conditions. With a tank of about 50 liters, the theoretical work reserve is: 2.5 l/h → about 20 hours 3 l/h → about 16.7 hours 4 l/h → about 12.5 hours The actual consumption depends on the weight of the load, the intensity of work, the engine speed, the state of the equipment and the skills of the operator. The main advantage The HELI CPCD25 + Quanchai QC490GP is a simple and efficient diesel loader for moving loads up to 2.5 tons, especially suitable for warehouses, manufacturing plants, construction sites and open areas.